مقالات

مقاله­های ارائه شده به نام مرکز در مجلات و همایش­ها

ردیف

عنوان مقاله

عنوان مجله یا همایش

نام نویسندگان

تاریخ انتشار

1

 

 Investigation on mechanochemical synthesis of Al2O3/BN nanocomposite by aluminothermic reaction

 

Ceramics International, Volume 40, Issue 4, May 2014, Pages 5559-5566

 

 

Amir Javad Nikkhah, Omid Torabi, Reza Ebrahimi-Kahrizsangi, Sanaz Naghibi, Amin Jamshidi

 

2014

2

Formation and stability of tungsten boride nanocomposites in WO3–B2O3–Mg ternary system: Mechanochemical effects

International Journal of Refractory Metals and Hard Materials, Volume 46, September 2014, Pages 117-124 

Mojtaba Bahrami-Karkevandi,

Reza Ebrahimi-Kahrizsangi, Bahman Nasiri-Tabrizi

 

2014

3

Mechanosynthesis of nanosized B-type carbonated fluorapatite

 

Materials Letters, Volume 134, 1 November 2014, Pages 42-46

 

Bahman Nasiri-Tabrizi, Abbas Fahami

 

2014

4

A study on mechanochemical behavior of MoO3–Mg–C to synthesize molybdenum carbide

International Journal of Refractory Metals and Hard Materials, Volume 47, November 2014, Pages 18-24

 

Omid Torabi, Mohammad Hossein Golabgir, Hamid Tajizadegan, Hamid Torabi

 

2014

5

Investigation on bioactivity and cytotoxicity of mesoporous nano-composite MCM-48/hydroxyapatite for ibuprofen drug delivery

Ceramics International, Volume 40, Issue 5, June 2014, Pages 7355-7362

 

Hoda Aghaei, Amir Abbas Nourbakhsh, Saeed Karbasi, Roozbeh JavadKalbasi, Mohammad Rafienia, Nosrat Nourbakhsh, Shahin Bonakdar, Kenneth J.D. Mackenzie

 

2014

6

Fabrication and evaluation of oxidation resistance performance of open-celled Fe(Al) foam by space-holder technique

Advanced Powder Technology, Volume 25, Issue 3, May 2014, Pages 960-967

 

Mohammad Hossein Golabgir, Reza Ebrahimi-Kahrizsangi, Omid Torabi, Hamid Tajizadegan, Amin Jamshidi

 

2014

7

radual mechanochemical reaction to produce carbonate doped fluorapatite-titania composite nanopowder

Ceramics International,  online 25 July 2014

 

Bahman Nasiri-Tabrizi, Erfan Zalnezhad, A.M.S. Hamouda, W.J. Basirun, Belinda Pingguan-Murphy, Abbas Fahami, M. Sarraf, A.R. Rafieerad

 

2014

8

Mechanosynthesis of nanocomposites in TiO2–B2O3–Mg–Al quaternary system

Ceramics International, Volume 40, Issue 5, June 2014, Pages 7133-7142

 

Touraj Adhami, Reza Ebrahimi-Kahrizsangi, Bahman Nasiri-Tabrizi

 

2014

9

Effect of processing parameters on the formation of TiB2 nanopowder by mechanically induced self-sustaining reaction

Ceramics International, Volume 40, Issue 5, June 2014, Pages 7345-7354

 

Bahman Nasiri-Tabrizi, Touraj Adhami, Reza Ebrahimi-Kahrizsangi

 

2014

10

Mechanochemical behavior of CaCO3–P2O5–CaF2 system to produce carbonated fluorapatite nanopowder

Ceramics International, In Press, Corrected Proof, Available online 23 June 2014

 

Abbas Fahami, Bahman Nasiri-Tabrizi

2014

11

Effect of excess boron oxide on the formation of tungsten boride nanocomposites by mechanically induced self-sustaining reaction

Ceramics International, Available online 11 June 2014

 

Bahman Nasiri-Tabrizi, Reza Ebrahimi-Kahrizsangi, Mojtaba Bahrami-Karkevandi

 

2014

12

effect of the magnesium content on the mechanochemical behavior in ternary system Mg–B2O3–C

international Journal of Refractory Metals and Hard Materials, Volume 43, March 2014, Pages 132-140

Mohammad Yaghoubi, Omid Torabi

 

2014

13

Effect of the aluminum content on the mechanochemical behavior in ternary system Al–B2O3–C

international Journal of Refractory Metals and Hard Materials, Volume 36, January 2013, Pages 90-96

·     Omid Torabi, Reza Ebrahimi‐Kahrizsangi 

2013

14

 Investigation on mechanochemical synthesis of Al2O3/BN nanocomposite by aluminothermic reaction

Ceramics International, Volume 40, Issue 4, May 2014, Pages 5559-5566

 

Amir Javad Nikkhah, Omid Torabi, Reza Ebrahimi-Kahrizsangi, Sanaz Naghibi, Amin Jamshidi

 

2014

15

Formation and stability of tungsten boride nanocomposites in WO3–B2O3–Mg ternary system: Mechanochemical effects

International Journal of Refractory Metals and Hard Materials, Volume 46, September 2014, Pages 117-124 

Mojtaba Bahrami-Karkevandi, Reza Ebrahimi-Kahrizsangi, Bahman Nasiri-Tabrizi

 

2014

16

Influence of Different Alumina Precursors on Structural Properties and Morphology of ZnO-Al2O3 Nanocomposite Powder

International Journal of Applied Ceramic Technology

Tajizadegan, H., Torabi, O., Heidary, A., Golabgir, M.-H., Siampour, F.

 

2015

17

Application of taguchi method for characterization of corrosion behavior of TiO2 coating prepared by sol-gel dipping technique

International Journal of Applied Ceramic Technology

 

Naghibi, S. , Jamshidi, A., Torabi, O., Kahrizsangi, R.E.

 

2015

18

The effect of different sources of porous carbon on the synthesis of nanostructured boron carbide by magnesiothermic reduction

 

Ceramics International,

 

Parvaneh Asgarian, Amirabbas Nourbakhsh, Parinaz Amin, Reza Ebrahimi-Kahrizsangi, Kenneth J.D. MacKenzie

 

2015

19

Effect of excess boron oxide on the formation of tungsten boride nanocomposites by mechanically induced self-sustaining reaction

Ceramics International,

Bahman Nasiri-Tabrizi, Reza Ebrahimi-Kahrizsangi, Mojtaba Bahrami-Karkevandi

 

2015

20

Mechanochemical behavior of CaCO3–P2O5–CaF2 system to produce carbonated fluorapatite nanopowder

Ceramics International,

Abbas Fahami, Bahman Nasiri-Tabrizi

 

2015

21

Investigation on bioactivity and cytotoxicity of mesoporous nano-composite MCM-48/hydroxyapatite for ibuprofen drug delivery

Ceramics International

Hoda Aghaei, Amir Abbas Nourbakhsh, Saeed Karbasi, Roozbeh JavadKalbasi, Mohammad Rafienia, Nosrat Nourbakhsh, Shahin Bonakdar, Kenneth J.D. Mackenzie

2015

22

Mechanosynthesis of nanocomposites in TiO2–B2O3–Mg–Al quaternary system

Ceramics International,

Touraj Adhami, Reza Ebrahimi-Kahrizsangi, Bahman Nasiri-Tabrizi

2015

23

Effect of processing parameters on the formation of TiB2 nanopowder by mechanically induced self-sustaining reaction

Ceramics International,

Bahman Nasiri-Tabrizi, Touraj Adhami, Reza Ebrahimi-Kahrizsangi

2015

24

Gradual mechanochemical reaction to produce carbonate doped fluorapatite–titania composite nanopowder

Ceramics International

Bahman Nasiri-Tabrizi, Erfan Zalnezhad, A.M.S. Hamouda, W.J. Basirun, Belinda Pingguan-Murphy, Abbas Fahami, M. Sarraf, A.R. Rafieerad

2015

25

Effect of the magnesium content on the mechanochemical behavior in ternary system Mg–B2O3–C

International Journal of Refractory Metals and Hard Materials,

Mohammad Yaghoubi, Omid Torabi

2015

26

An investigation on the mechanochemical behavior of the Ca-C-Cu2O-WO3 quaternary system to synthesize the Cu-WC nanocomposite powder

International Journal of Refractory Metals and Hard Materials

Ebrahimi-Kahrizsangi, R. ,Mahabadi, M.K.,- Torabi, O.

2015

27

Characterization of mechanically alloyed nanocomposites in TiO2–B2O3–Mg–C quaternary system

International Journal of Refractory Metals and Hard Materials,

Touraj A dhami,Bahman Nasiri-Tabrizi, , Reza Ebrahimi-Kahrizsangi

 

2015

28

Fabrication and evaluation of oxidation resistance performance of open-celled Fe(Al) foam by space-holder technique

Advanced Powder Technology,

Mohammad Hossein Golabgir, , Reza Ebrahimi-Kahrizsangi,Omid Torabi,Hamid Tajizadegan,Amin Jamshidi

2015

29

Influence of evolving microstructure on electrical and magnetic characteristics in mechanically synthesized polycrystalline Ni-ferrite nanoparticles

Advanced Powder Technology,

Hajaliloua, , , M. Hashima,R. Ebrahimi-Kahrizsangib, Halimah Mohamed Kamari

2015

30

Investigation on mechanochemical behavior of the TiO2–Mg–C system reactive mixtures in the synthesis of titanium carbide

Ceramics International

Reza Ebrahimi-KahrizsangiMarzieh Alimardani, Omid Torabi

 

2015

31

Ignition time of nanopowders during milling: A novel simulation

Powder Technology

Reza Ebrahimi-Kahrizsangi , Majid Abdellahi Maryam Bahmanpour

2015

32

Self-ignited synthesis of  Nano composite powders induced by Spex mills; modeling and optimizing

Ceramics International

Reza Ebrahimi-Kahrizsangi , Majid Abdellahi Maryam Bahmanpour

 

2015

33

The effect of different sources of porous carbon on the synthesis of nanostructured boron carbide by magnesiothermic reduction

Ceramics International,

Parvaneh Asgarian,Amirabbas Nourbakhsh, , Parinaz Amin ,Reza Ebrahimi-Kahrizsangia, Kenneth J.D. MacKenzie

2015

34

Effect of excess boron oxide on the formation of tungsten boride nanocomposites by mechanically induced self-sustaining reaction

Ceramics International,

Bahman Nasiri-Tabrizi,Reza Ebrahimi-Kahrizsangi, ,Mojtaba Bahrami-Karkevandi

2015

35

Formation and stability of tungsten boride nanocomposites in WO3 –B2O3 –Mg ternary system: Mechanochemical effects

International Journal of Refractory Metals and Hard Materials

Mojtaba Bahrami-Karkevandi, Reza Ebrahimi-Kahrizsangi, Bahman Nasiri-Tabrizi

2015

36

Reaction chemistry in the Mg–B2O3–MoO3 system reactive mixtures

International Journal of Refractory Metals and Hard Materials,

Omid Torabi,Reza Ebrahimi-Kahrizsangi,Mohammad Hossein Golabgir, Hamid Tajizadegan,Amin Jamshidi

2015

37

Phase transitions and structural changes of nanostructured chlorapatite under thermal treatment

Ceramics International

 

Bahman Nasiri-Tabrizi, Abbas Fahami , Reza Ebrahimi-Kahrizsangi

2015

38

Influence of growth conditions on the electrochemical synthesis of SnS thin films and their optical properties

International Journal of Minerals, metallurgy and materials

Hosein Kafashan, Farid Jamali-Sheini,Reza Ebrahimi-Kahrizsangi,and Ramin Yousefi

2015

39

structural, tribological and electrochemical behavior of SiC nanocomposite oxide coatings fabricated buplasma electrolytic oxidation(PEO) on AZ31magnesium alloy

journal of alloys and compounds

 

H. Nasiri Vatan, R. Ebrahimi-kahrizsangi, , M. Kasiri-asgarani

2015

40

nanostructured SnS1-xTex thin films: effect of te concentration and physical properties

journal of alloys and compounds

Hosein KafashanFarid Jamali-Sheini, Reza Ebrahimi-Kahrizsangi,Ramin Yousefi

2015

41

Influence of Different Alumina Precursors on Structural Properties and Morphology of
ZnO-Al2O3 Nanocomposite Powder

International Journal of Applied Ceramic Technology

Tajizadegan, H., Torabi, O., Heidary, A., Golabgir, M.-H., Siampour, F.

 

 

2015

42

Characterization of nickel-doped biphasic calcium phosphate/graphene nanoplatelet composites for biomedical application

Mater Sci Eng C Mater Biol Appl.

S. Baradaran, E. Moghaddam,Bahman Nasiri-Tabrizi,W.J. Basirun, M. Mehrali,M. Sookhakian, M. Hamdi,  Y. Alias

 

2015

43

Exploring a new phenomenon in the bactericidal response of TiO2 thin films by Fe doping: Exerting the antimicrobial activity even after stoppage of illumination

Applied Surface Science

 

Sanaz Naghibi, Shohreh Vahed, Omid Torabi, Amin Jamshidi , Mohammad Hossein Golabgir

2015

44

Application of taguchi method for characterization of corrosion behavior of TiO2 coating prepared by sol-gel dipping technique

International Journal of Applied Ceramic Technology

 

Naghibi, S. , Jamshidi, A., Torabi, O., Kahrizsangi, R.E.

 

2015

45

Investigation on mechanochemical synthesis of Al2O3/BN nanocomposite by aluminothermic reaction

Ceramics International,

 

Amir Javad Nikkhah, Omid Torabi, Reza Ebrahimi-Kahrizsangi, Sanaz Naghibi, Amin Jamshidi

2015

46

Mechanosynthesis of nanosized B-type carbonated fluorapatite

 

Materials Letters,

 

Bahman Nasiri-Tabrizi, Abbas Fahami

2015

47

A study on mechanochemical behavior of MoO3–Mg–C to synthesize molybdenum carbide

International Journal of Refractory Metals and Hard Materials,

Omid Torabi, Mohammad Hossein Golabgir, Hamid Tajizadegan, Hamid Torabi

 

2015

48

The effect of different sources of porous carbon on the synthesis of nanostructured boron carbide by magnesiothermic reduction

 

Ceramics International,

 

Parvaneh Asgarian, Amirabbas Nourbakhsh, Parinaz Amin, Reza Ebrahimi-Kahrizsangi, Kenneth J.D. MacKenzie

2015

49

Effect of excess boron oxide on the formation of tungsten boride nanocomposites by mechanically induced self-sustaining reaction

Ceramics International,

Bahman Nasiri-Tabrizi, Reza Ebrahimi-Kahrizsangi, Mojtaba Bahrami-arkevandi

 

2015

50

Mechanochemical behavior of CaCO3–P2O5–CaF2 system to produce carbonated fluorapatite nanopowder

Ceramics International,

Abbas Fahami, Bahman Nasiri-Tabrizi

2015

51

Effect of processing parameters on the formation of TiB2 nanopowder by mechanically induced self-sustaining reaction

Ceramics International,

Bahman Nasiri-Tabrizi, Touraj Adhami, Reza Ebrahimi-Kahrizsangi

2015

52

Effect of the magnesium content on the mechanochemical behavior in ternary system Mg–B2O3–C

Ceramics International

Bahman Nasiri-Tabrizi, Erfan Zalnezhad, A.M.S. Hamouda, W.J. Basirun, Belinda Pingguan-Murphy, Abbas Fahami, M. Sarraf, A.R. Rafieerad

2015

53

Influence of growth conditions on the electrochemical synthesis of SnS thin films and their optical properties

International Journal of Refractory Metals and Hard Materials

Ebrahimi-Kahrizsangi, R. ,Mahabadi, M.K.,- Torabi, O.

2015

54

Evaluation of mechanical property and bioactivity of nano-bioglass 45S5 scaffold coated with poly-3-hydroxybutyrate

International Journal of Refractory Metals and Hard Materials,

Touraj A dhami,Bahman Nasiri-Tabrizi, , Reza Ebrahimi-Kahrizsangi

2015

55

Influence of growth conditions on the electrochemical synthesis of SnS thin films and their optical properties

International Journal of Minerals, Metallurgy and materials

Hosein Kafashan, Farid Jamali-Sheini,Reza Ebrahimi-Kahrizsangi,and Ramin Yousefi

2015

56

An investigation on the mechanochemical behavior of the Ca–C–Cu2O–WO3 quaternary system to synthesize the Cu–WC nanocomposite powder

International Journal of Refractory Metals and Hard Materials

 

Reza Ebrahimi-Kahrizsangi, , Mohammadreza Kalani Mahabadi, Omid Torabi

 

2015

57

Contribution of mechanical activation and annealing in the formation of nanopowders of Al(Cu)/TiC-Al2O3 hybrid nanocomposite

Ceramics International

Mostaan H., Mehrizi M.Z., Beygi R., Rafiei M., Abbasian A.R.

2015

58

Influence of heat treatment on mechanical properties and microstructure of the Al2024/SiC composite produced by multi–pass friction stir processing

Journal of the International Measurement Confederation

Ghanbari D., Kasiri Asgarani M., Amini K., Gharavi F.

2015

59

Mechanochemically aided sintering process for the synthesis of barium ferrite: Effect of aluminum substitution on microstructure, magnetic properties and microwave absorption

Journal of Alloys and Compounds

Shayan A., Abdellahi M., Shahmohammadian F., Jabbarzare S., Khandan A., Ghayour H.

2015

60

The impact of trivalent oxide nanoparticles on the microstructure and performance of magnesite-dolomite refractory bricks

Materials Chemistry and Physics

Ghasemi-Kahrizsangi S., Karamian E., Ghasemi-Kahrizsangi A., Desheikh H.G., Soheily A.

2015

61

On the synthesis of nanostructured akermanite scaffolds via space holder method: The effect of the spacer size on the porosity and mechanical properties

Journal of the Mechanical Behavior of Biomedical Materials

Najafinezhad A., Abdellahi M., Nasiri-Harchegani S., Soheily A., Khezri M., Ghayour H.

2015

62

Toward improved mechanical, tribological, corrosion and in-vitro bioactivity properties of mixed oxide nanotubes on Ti–6Al–7Nb implant using multi-objective PSO

Journal of the Mechanical Behavior of Biomedical Materials

Rafieerad A.R., Bushroa A.R., Nasiri-Tabrizi B., Kaboli S.H.A., Khanahmadi S., Amiri A., Vadivelu J., Yusof F., Basirun W.J., Wasa K.

2015

63

In-vitro bioassay of electrophoretically deposited hydroxyapatite–zirconia nanocomposite coating on Ti–6Al–7Nb

Advances in Applied Ceramics

Rafieerad A.R., Bushroa A.R., Nasiri-Tabrizi B., Baradaran S., Shahtalebi S., Khanahmadi S., Afshar-Mohajer M., Vadivelu J., Yusof F., Basirun W.J.

2015

64

In situ reverse co-precipitation synthesis and magnetic properties of CuO/CuFe2O4 nanocomposite

Journal of Sol-Gel Science and Technology

Karimi M., Hassanzadeh-Tabrizi S.A., Saffar-Teluri A.

2015

65

Effect of MgAl2O4 nanoparticles addition on the densification and properties of MgO-CaO refractories

Ceramics International

Ghasemi-Kahrizsangi S., Dehsheikh H.G., Karamian E., Boroujerdnia M., Payandeh K.

2015

66

Fabrication of biodegradable Zn-Al-Mg alloy: Mechanical properties, corrosion behavior, cytotoxicity and antibacterial activities

Materials Science and Engineering C

Bakhsheshi-Rad H.R., Hamzah E., Low H.T., Kasiri-Asgarani M., Farahany S., Akbari E., Cho M.H.

2015

67

Effect of post weld heat treatment (PWHT) on the microstructure, mechanical properties, and corrosion resistance of dissimilar stainless steels

Materials Science and Engineering A

Ghorbani S., Ghasemi R., Ebrahimi-Kahrizsangi R., Hojjati-Najafabadi A.

2015

68

Al–Cu–Fe coatings manufactured by the flame spraying process

Materials and Manufacturing Processes

Ashja M., Verdian M.M

2015

69

Processing and properties of CuAl2 intermetallic coatings

Surface Engineering

Abbasi M., Verdian M.M.

2015

70

Fe doped barium aluminate nano-powder: A versatile catalyst for the epoxidation of α, β-unsaturated ketone

Indian Journal of Chemical Technology

Kazemi N., Ghashang M.

2015

71

A comparative study on the synthesis mechanism, bioactivity and mechanical properties of three silicate bioceramics

Materials Science and Engineering C

Najafinezhad A., Abdellahi M., Ghayour H., Soheily A., Chami A., Khandan A.

2015

72

A study on the synthesis and magnetic properties of the cerium ferrite ceramic

Journal of Alloys and Compounds

Jabbarzare S., Abdellahi M., Ghayour H., Arpanahi A., Khandan A.

2015

73

ZnO–CdO nanocomposite: microemulsion synthesis and dye removal ability

Journal of Sol-Gel Science and Technology

Khalili E., Hassanzadeh-Tabrizi S.A.

2015

74

Study of in vitro bioactivity and mechanical properties of diopside nano-bioceramic synthesized by a facile method using eggshell as raw material

Materials Science and Engineering C

Kazemi A., Abdellahi M., Khajeh-Sharafabadi A., Khandan A., Ozada N.

2015

75

A novel and economical route for synthesizing akermanite (Ca2MgSi2O7) nano-bioceramic

Ceramics International

Sharafabadi A.K., Abdellahi M., Kazemi A., Khandan A., Ozada N.

2015

76

Contribution of mechanical activation and annealing in the formation of nanopowders of Al(Cu)/TiC-Al2O3 hybrid nanocomposite

Ceramics International

Mostaan H., Mehrizi M.Z., Rafiei M., Beygi R., Abbasian A.R.

2015

77

Microstructure, In Vitro Corrosion Behavior and Cytotoxicity of Biodegradable Mg-Ca-Zn and Mg-Ca-Zn-Bi Alloys

Journal of Materials Engineering and Performance

Bakhsheshi-Rad H.R., Hamzah E., Tok H.Y., Kasiri-Asgarani M., Jabbarzare S., Medraj M.

2015

78

Nanomechanical properties, wear resistance and in-vitro characterization of Ta2O5 nanotubes coating on biomedical grade Ti–6Al–4V

Journal of the Mechanical Behavior of Biomedical Materials

Sarraf M., Razak B.A., Nasiri-Tabrizi B., Dabbagh A., Kasim N.H.A., Basirun W.J., Bin Sulaiman E.

2015

79

The influence of Al2O3 nanoparticles addition on the microstructure and properties of bauxite self-flowing low-cement castables

Ceramics International

Ghasemi-Kahrizsangi S., Gheisari Dehsheikh H., Karamian E., Ghasemi-Kahrizsangi A., Vahid Hosseini S.

2015

80

Thermal characteristics, mechanical properties, in vitro degradation and cytotoxicity of novel biodegradable Zn-Al-Mg

Acta Metallurgica Sinica (English Letters)

Bakhsheshi-Rad H.R., Hamzah E., Low H.T., Cho M.H., Kasiri-Asgarani M., Farahany S., Mostafa A., Medraj M.

2015

81

Microstructure evaluation of CO-222/SiC coating produced by the plasma spraying method

Surface Engineering

Jafari M., Mostaghimi J., Monajatizadeh H., Rafiei M.

2015

82

Mechanochemically assisted synthesis of yttrium ferrite ceramic and its visible light photocatalytic and magnetic properties

Journal of Alloys and Compounds

Jabbarzare S., Abdellahi M., Ghayour H., Chami A., Hejazian S.

2015

83

Preparation and corrosion resistance of a nanocomposite plasma electrolytic oxidation coating on Mg-1%Ca alloy

Journal of Alloys and Compounds

Daroonparvar M., Yajid M.A.M., Yusof N.M., Bakhsheshi-Rad H.R.

2016

84

Synthesis and characterization of mercaptoacetic acid/lead sulfide inorganic/organic nanocomposite

Journal of Materials Science: Materials in Electronics

Loghman-Estarki M.R., Rafiei M.

2016

85

Mechanochemical preparation and structural characterization of Ta-doped chlorapatite nanopowders

Progress in Natural Science: Materials International

Nasiri-Tabrizi B., Basirun W.J., Pingguan-Murphy B.

2016

86

In vitro evaluation of actively targetable superparamagnetic nanoparticles to the folate receptor positive cancer cells

Materials Science and Engineering C

Nasiri R., Hamzehalipour Almaki J., Idris A.B., Abdul Majid F.A., Nasiri M., Salouti M., Irfan M., Amini N., Marvibaigi M.

2016

87

Ordered mesoporous magnesium silicate with uniform nanochannels as a drug delivery system: The effect of calcination temperature on drug delivery rate

Ceramics International

Bigham A., Hassanzadeh-Tabrizi S.A., Rafienia M., Salehi H.

2016

88

In situ microemulsion synthesis of hydroxyapatite-MgFe2O4 nanocomposite as a magnetic drug delivery system

Materials Science and Engineering C

Foroughi F., Hassanzadeh-Tabrizi S.A., Bigham A.

2016

89

Formation mechanism of ultra-high temperature nanocomposites by mechanically induced self-sustaining reactions

Synthesis and Reactivity in Inorganic, Metal-Organic and Nano-Metal Chemistry

Nasiri-Tabrizi B., Ebrahimi-Kahrizsangi R., Basirun W.J., Adhami T.

2016

90

Synthesis of SrAl2O4:Sm nanopowder using reverse microemulsion and polyacrylamide gel methods: a comparison

Journal of Sol-Gel Science and Technology

Hassanzadeh-Tabrizi S.A., Jafari M., Pournajaf R., Faeghi-Nia A.

2016

91

Corrosion and bioactivity performance of graphene oxide coating on Ti-Nb shape memory alloys in simulated body fluid

Materials Science and Engineering C

Saud S.N., Raheleh Hosseinian S., Bakhsheshi-Rad H.R., Yaghoubidoust F., Iqbal N., Hamzah E., Ooi C.H.R.

2016

92

Nano-mechanical properties and microstructure of UFG brass tubes processed by parallel tubular channel angular pressing

Metals and Materials International

Mesbah M., Fadaeifard F., Karimzadeh A., Nasiri-Tabrizi B., Rafieerad A., Faraji G., Bushroa A.R.

2016

93

Synthesis of ZnO/CuO nanocomposite immobilized on γ-Al2O3 and application for removal of methyl orange

Applied Surface Science

Hassanzadeh-Tabrizi S.A., Motlagh M.M., Salahshour S.

2016

94

Structural, tribological and electrochemical behavior of SiC nanocomposite oxide coatings fabricated by plasma

Journal of Alloys and Compounds

Nasiri Vatan H., Ebrahimi-Kahrizsangi R., Kasiri-Asgarani M.

2016

95

Nanostructured SnS1-xTex thin films: Effect of Te concentration and physical properties

Journal of Alloys and Compounds

Kafashan H., Jamali-Sheini F., Ebrahimi-Kahrizsangi R., Yousefi R.

2016

96

Fabrication of FeAl(Cu) intermetallic coatings by plasma spraying of vacuum annealed powders

Vacuum

Verdian M.M.

2016

97

Green synthesis of NiFe2O4/Fe2O3/CeO2 nanocomposite in a walnut green hulls extract medium: Magnetic properties and characterization

Current Nanoscience

Shafiee M.R.M., Kargar M., Hashemi M.S., Ghashang M.

2016

98

Silver/silver oxide nanorod arrays from physical vapor deposition and subsequent anodization processes

Surface and Coatings Technology

Rafieerad A.R., Bushroa A.R., Nasiri-Tabrizi B., Vadivelu J., Basirun W.J.

2016

99

Effects of PACVD parameters including pulsed direct current and deposition time on nanostructured carbon coating

Materials and Design

Kariminejad A., Taheri-Nassaj E., Ghanbarian M., Hassanzadeh-Tabrizi S.A.

2016

100

Introducing the fluorine doped natural hydroxyapatite-titania nanobiocomposite ceramic

Journal of Alloys and Compounds

Karamian E., Abdellahi M., Khandan A., Abdellah S.

2016

101

Growth, corrosion and wear resistance of SiC nanoparticles embedded MAO coatings on AZ31B magnesium alloy

Protection of Metals and Physical Chemistry of Surfaces

Vatan H.N., Kahrizsangi R.E., Asgarani M.K.

2016

102

Nanostructured CuAl2O4: Co-precipitation synthesis, optical and photocatalytic properties

Ceramics International

Hassanzadeh-Tabrizi S.A., Pournajaf R., Moradi-Faradonbeh A., Sadeghinejad S.

2016

103

The side effects of surface modification of porous titanium implant using hydrogen peroxide: Mechanical properties aspects

Materials Letters

Khodaei M., Meratian M., Savabi O., Fathi M., Ghomi H.

2016

104

Structure, corrosion behavior, and antibacterial properties of nano-silica/graphene oxide coating on biodegradable magnesium alloy for biomedical applications

Vacuum

Bakhsheshi-Rad H.R., Hamzah E., Kasiri-Asgarani M., Saud S.N., Yaghoubidoust F., Akbari E.

2016

105

Preparation and Performance of Plasma/Polymer Composite Coatings on Magnesium Alloy

Journal of Materials Engineering and Performance

Bakhsheshi-Rad H.R., Hamzah E., Bagheriyan S., Daroonparvar M., Kasiri-Asgarani M., Shah A.M., Medraj M.

2016

106

Mechanical properties, corrosion behavior and in-vitro bioactivity of nanostructured Pd/PdO coating on Ti-6Al-7Nb

Materials and Design

Rafieerad A.R., Bushroa A.R., Nasiri-Tabrizi B., Vadivelu J., Baradaran S., Mesbah M., Zavareh M.A.

2016

107

GEP-based method to formulate adhesion strength and hardness of Nb PVD coated on Ti-6Al-7Nb aimed at developing mixed oxide nanotubular arrays

Journal of the Mechanical Behavior of Biomedical Materials

Rafieerad A.R., Bushroa A.R., Nasiri-Tabrizi B., Fallahpour A., Vadivelu J., Musa S.N., Kaboli S.H.A.

2016

108

Novel bi-layered nanostructured SiO2/Ag-FHAp coating on biodegradable magnesium alloy for biomedical applications

Ceramics International

Bakhsheshi-Rad H.R., Hamzah E., Ismail A.F., Kasiri-Asgarani M., Daroonparvar M., Parham S., Iqbal N., Medraj M.

2016

109

Erratum: Preparation and characterization of multi layer mesoporous alumina nano membrane via sol-gel method using new precursors

Ceramics International

Kheirollahi I., Abdellahi M., Emamalizadeh M., Sharifi H.

2016

110

Fabrication, degradation behavior and cytotoxicity of nanostructured hardystonite and titania/hardystonite coatings on Mg alloys

Vacuum

 

Bakhsheshi-Rad H.R., Hamzah E., Kasiri-Asgarani M., Jabbarzare S., Daroonparvar M., Najafinezhad A.

2016

111

Tribological performance of PEO-WC nanocomposite coating on Mg Alloys deposited by Plasma Electrolytic Oxidation

Tribology International

Nasirivatan H., Kahrizsangi R.E., Asgarani M.K.

2016

112

Effect of Al doping on the structural and optical properties of electrodeposited SnS thin films

Physica Status Solidi (A) Applications and Materials Science

Kafashan H., Ebrahimi-Kahrizsangi R., Jamali-Sheini F., Yousefi R.

2016

113

The effects of Sn-substitution on thermoelectric properties of In4-xSnxSe3 ceramic

Ceramics International

Abhari A.S., Abdellahi M., Bahmanpour M.

2016

114

Influence of phosphate binders on the physical and mechanical properties of magnesia carbon monolithics composed of recycled refractory aggregates

Ironmaking and Steelmaking

Alizadeh S., Shalbafi A., Monshi A., Yazdkhasti S.

2016

115

Study of the bioactivity, wettability and hardness behaviour of the bovine hydroxyapatite-diopside bio-

Journal of the Taiwan Institute of Chemical Engineers

Khandan A., Abdellahi M., Ozada N., Ghayour H.

2016

116

Influence of growth conditions on the electrochemical synthesis of SnS thin films and their optical properties

International Journal of Minerals, Metallurgy and Materials

Kafashan H., Jamali-Sheini F., Ebrahimi-Kahrizsangi R., Yousefi R.

2016

117

Fabrication and characterization of hydrophobic microarc oxidation/poly-lactic acid duplex coating on biodegradable

Vacuum

Bakhsheshi-Rad H.R., Hamzah E., Ebrahimi-Kahrizsangi R., Daroonparvar M., Medraj M.

2016

118

Deposition of nanostructured fluorine-doped hydroxyapatite-polycaprolactone duplex coating to enhance

Materials Science and Engineering C

Bakhsheshi-Rad H.R., Hamzah E., Kasiri-Asgarani M., Jabbarzare S., Iqbal N., Abdul Kadir M.R.

2016

119

Crystallization behavior of tantalum and chlorine co-substituted hydroxyapatite nanopowders

Journal of Industrial and Engineering Chemistry

Nasiri-Tabrizi B., Pingguan-Murphy B., Basirun W.J., Baradaran S.

2016

120

Enhancement of the anti-corrosion efficient of hybrid nanostructure coating using copper phthalocyanine self-assembled monolayers

Protection of Metals and Physical Chemistry of Surfaces

Davoodi M., Nasr-Esfahani M.

2016

121

Mechanically induced self-sustaining reactions

International Journal of Self-Propagating High-Temperature Synthesis

Ebrahimi-Kahrizsangi R., Abdellahi M., Bahmanpour M.

2016

122

Surfactant-assisted sol-gel synthesis of forsterite nanoparticles as a novel drug delivery system

Materials Science and Engineering C

Hassanzadeh-Tabrizi S.A., Bigham A., Rafienia M.

2017

123

Failure analysis of drill pipe: A review

Engineering Failure Analysis

Zamani S.M., Hassanzadeh-Tabrizi S.A., Sharifi H.

2017

124

Introducing a composite coating containing CNTs with good corrosion properties: Characterization and simulation

RSC Advances

Bakhsheshi-Rad H.R., Abdellahi M., Hamzah E., Daroonparvar M., Rafiei M.

2017

125

The role of solution heat treatment on corrosion and mechanical behaviour of Mg-Zn biodegradable alloys

Canadian Metallurgical Quarterly

Lotfabadi A.F., Bakhsheshi-Rad H.R., Idris M.H., Hamzah E., Kasiri-Asgarani M.

2017

126

Optimizing PVD conditions for electrochemical anodization growth of well-adherent Ta2O5 nanotubes on Ti-6Al-4V

RSC Advances

Sarraf M., Abdul Razak B., Dabbagh A., Nasiri-Tabrizi B., Abu Kasim N.H., Basirun W.J.

2017

127

Optimized fabrication and characterization of TiO2-Nb2O5-Al2O3 mixed oxide nanotube arrays on Ti-6Al-7Nb

RSC Advances

Rafieerad A.R., Bushroa A.R., Nasiri-Tabrizi B., Vadivelu J., Baradaran S., Zalnezhad E., Amiri A.

2017

128

An Investigation into the Corrosion Behavior of MgO/ZrO2

Nanocomposite Coatings Prepared by Plasma Electrolytic

Oxidation on the AZ91 Magnesium Alloy

Journal of Materials Engineering and Performance

Nasrollah Eslamzadeh, Reza Ebrahimi-Kahrizsangi, Saeed Karbasi, Arman Zarebidaki, and Farhad Gharavi

2017

129

Novel nanostructured baghdadite-vancomycin scaffolds: In-vitro drug release, antibacterial activity and biocompatibility

Materials Letters,

Bakhsheshi-Rad, H.R., Hamzah, E., Ismail, A.F., Aziz, M., Hadisi, Z., Kashefian, M., Najafinezhad, A.

2017

130

Facile synthesis and structural insight of chloride intercalated Ca/Al layered double hydroxide nanopowders

Journal of Alloys and Compounds

Fahami, A., Duraia, E.-S.M., Beall, G.W., Fahami, M.

2017

131

Dry sliding wear behavior of open-cell Al-Mg/Al2O3 and Al-Mg/SiC-Al2O3 composite preforms produced by a pressureless infiltration technique

Tribology International

Sharifi, H., Ostovan, K., Tayebi, M., Rajaee, A.

2017

132

Microstructure, deposition mechanism and corrosion behavior of nanostructured cerium oxide conversion coating modified with chitosan on AA2024 aluminum alloy

Journal of Alloys and Compounds

Hassannejad, H., Moghaddasi, M., Saebnoori, E., Baboukani, A.R.

2017

133

Drug delivery and cytocompatibility of ciprofloxacin loaded gelatin nanofibers-coated Mg alloy

Materials Letters

Bakhsheshi-Rad, H.R., Hadisi, Z., Hamzah, E., Ismail, A.F., Aziz, M., Kashefian, M.

2017

134

Synthesis, characterization, and magnetic properties of ZnO-ZnFe2O4 nanoparticles with high photocatalytic activity

Journal of Magnetism and Magnetic Materials

Falak, P., Hassanzadeh-Tabrizi, S.A., Saffar-Teluri, A.

2018

135

Effect of dopant loading on the structural features of silver-doped hydroxyapatite obtained by mechanochemical method

Ceramics International

Fakharzadeh, A., Ebrahimi-Kahrizsangi, R., Nasiri-Tabrizi, B., Jefrey Basirun, W.

2018

136

Vertically oriented ZrO2[sbnd]TiO2[sbnd]Nb2O5[sbnd]Al2O3 mixed nanopatterned bioceramics on Ti6Al7Nb implant assessed by laser spallation technique

Journal of Alloys and Compounds

Rafieerad, A.R., Bushroa, A.R., Nasiri-Tabrizi, B., Crum, R., Gámez, C., Vadivelu, J., Gupta, V.

2018

137

Synthesis and characterization of Cu0.3Zn0.5Mg0.2Fe2O4 nanoparticles as a magnetic drug delivery system

Journal of Magnetism and Magnetic Materials

Ansari, M., Bigham, A., Hassanzadeh-Tabrizi, S.A., Abbastabar Ahangar, H.

2018

138

Investigations on Dissimilar Weld of UNS S32205 DSS and ASTM A517 Steel

Transactions of the Indian Institute of Metals

Foroughi, A., Shamanian, M., Kasiri-Asgarani, M., Kangazian, J.

2018

139

In-vitro bioassay of electrophoretically deposited hydroxyapatite–zirconia nanocomposite coating on Ti–6Al–7Nb implant

Advances in Applied Ceramics

Rafieerad, A.R., Bushroa, A.R., Nasiri-Tabrizi, B., Baradaran, S., Shahtalebi, S., Khanahmadi, S.,Afshar-Mohajer, M., Vadivelu, J., Yusof, F., Basirun, W.J.

2018

140

The influence of Al2O3 nanoparticles addition on the microstructure and properties of bauxite self–flowing low-cement castables

Ceramics International

Ghasemi-Kahrizsangi, S., Gheisari Dehsheikh, H., Karamian, E., Ghasemi-Kahrizsangi, A., Vahid Hosseini, S.

2018

141

Effective removal of penicillin from aqueous solution using zinc oxide/natural-Zeolite composite nano-powders prepared via ball milling technique

Recent Patents on Nanotechnology

Khosravian, P., Ghashang, M., Ghayoor, H.

2018

142

Tribological properties of B4C-TiB2-TiC-Ni cermet coating produced by HVOF

International Journal of Materials Research

Rafiei, M., Shamanian, M., Mostaan, H., Salehi, M.

2018

143

Preparing diopside nanoparticle scaffolds via space holder method: Simulation of the compressive strength and porosity

Journal of the Mechanical Behavior of Biomedical Materials

Abdellahi, M., Najafinezhad, A., Ghayour, H., Saber-Samandari, S., Khandan, A.

2018

144

Influence of calcium and phosphorus release from bioactive glasses on viability and differentiation of dental pulp stem cells

Journal of Materials Science

Houreh, A.B., Labbaf, S., Ting, H.-K., Ejeian, F., Jones, J.R., Esfahani, M.-H.N.

2018

145

Characterisation and thermodynamic calculations of biodegradable Mg–2.2Zn–3.7Ce and Mg–Ca–2.2Zn–3.7Ce alloys

Materials Science and Technology (United Kingdom),

Bakhsheshi-Rad, H.R., Hamzah, E., Joy Yii, S.L., Mostafa, A., Ebrahimi-Kahrizsangi, R., Medraj, M.

2018

146

Thermal and X-ray analyses of aluminum–titanium nanocomposite powder

Journal of Thermal Analysis and Calorimetry

Abdellahi, M., Jabbarzare, S., Ghayour, H., Khandan, A.

2018

147

Synthesis and characterization of nano Ce doped ZnO/γ-Al2O3 with improved photocatalytic activity

Journal of Materials Science: Materials in Electronics

Hassanzadeh-Tabrizi, S.A.

2018

148

In situ reverse co-precipitation synthesis and magnetic properties of CuO/CuFe2O4 nanocomposite

Journal of Sol-Gel Science and Technology

Karimi, M., Hassanzadeh-Tabrizi, S.A., Saffar-Teluri, A.

2018

149

Influence of heat treatment on mechanical properties and microstructure of the Al2024/SiC composite produced by multi–pass friction stir processing

Measurement: Journal of the International Measurement Confederation

Ghanbari, D., Kasiri Asgarani, M., Amini, K., Gharavi, F.

2018

150

The impact of trivalent oxide nanoparticles on the microstructure and performance of magnesite-dolomite refractory bricks

Materials Chemistry and Physics

Ghasemi-Kahrizsangi, S., Karamian, E., Ghasemi-Kahrizsangi, A., Desheikh, H.G., Soheily, A.

2018

151

On the synthesis of nanostructured akermanite scaffolds via space holder method: The effect of the spacer size on the porosity and mechanical properties

Journal of the Mechanical Behavior of Biomedical Materials

Najafinezhad, A., Abdellahi, M., Nasiri-Harchegani, S., Soheily, A., Khezri, M., Ghayour, H.

2018

152

Effect of MgAl2O4 nanoparticles addition on the densification and properties of MgO-CaO refractories

Ceramics International

Ghasemi-Kahrizsangi, S., Dehsheikh, H.G., Karamian, E., Boroujerdnia, M., Payandeh, K.

2018

153

Investigating mechanochemical behavior of Cr2O3–B2O3–Mg–C quaternary system

International Journal of Refractory Metals and Hard Materials,

Torabi, O., Golabgir, M.H., Tajizadegan, H., Jamshidi, A.

2018

154

 

Fabrication of biodegradable Zn-Al-Mg alloy: Mechanical properties, corrosion behavior, cytotoxicity and antibacterial activities

Materials Science and Engineering C

Bakhsheshi-Rad, H.R., Hamzah, E., Low, H.T., Kasiri-Asgarani, M., Farahany, S., Akbari, E., Cho,M.H.

2018

155

A comparative study of the influence of trivalent and tetravalent nano-sized oxides on the performance and microstructure of dolomite refractories

Boletin de la Sociedad Espanola de Ceramica y Vidrio,

Farshad, B., Karamian, E.

2018

156

In situ synthesis of Al2O3-supported ZnCr2O4 nanoparticles for application as an activated photocatalyst

International Journal of Applied Ceramic Technology

Tajizadegan, H., Naghibi, S., Jamshidi, A., Torabi, O., Golabgir, M.-H.

2018

157

Synthesis of a novel nanostructured zinc oxide/baghdadite coating on Mg alloy for biomedical application: In-vitro degradation behavior and antibacterial activities

Ceramics International

H.R. Bakhsheshi-Rad, , E. Hamzah, A.F. Ismail, M. Aziz, M. Kasiri-Asgarani,E. Akbari, S. Jabbarzare, A. Najafinezhad, Z. Hadisi

2018

158

Fabrication of Cu Surface Composite Reinforced by Ni Particles Via Friction Stir Processing:Microstructure and Tribology Behaviors

Journal of Tribology

Pezeshkian, M., Ebrahimzadeh, I., Gharavi, F

2018

159

In situ synthesis of Al2O3-supported ZnCr2O4 nanoparticles for application as an activated photocatalyst

International Journal of Applied Ceramic Technology

Tajizadegan, H., Naghibi, S., Jamshidi, A., Torabi, O., Golabgir, M.-H.

2018